We’re now stocking the UV Cure Resin Lam/Sanding in quarts and pints and will soon have it available in gallons. The keys to this resin is that it has an unlimited working time therefore making it easy to conserve resin. Basically you apply indoors and when you’ve worked out all the bubbles or what have you just walk the board outside. It will harden in a matter of minutes!
Check out this short video for an example of a board being lammed with UV Cure Resin:
There are a few tricks so don’t treat it exactly like the traditional MEKP catalyzed resin. Use a small amount of MEKP catalyst when applying your logo to the board. “Flash it” when hotcoating, this means to walk it out side for a minute then bring it back for the wax to rise, then bring it back outside to fully harden. This resin can be used directly from the can since UV resin hardens when exposed to sunlight therefore it doesn’t need to be mixed. If no UV source is available MEKP Catalyst must be used to cure the resin. There more tips and full directions on the back of each can.
This stuff is the best for ding repair, you just can’t beat the speed in which you can do a repair correctly.
Check it out and let us know what you think.